Wiseco Piston Applications: Hyundai
All Wiseco Pistons are sold with a ring set. Rings are available to order for rebuilding or refreshening of the engine.
| Hyundai | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tiburon 2.0 Beta 1 engine. 1997-2000 | |||||||||||||||
| Kit Part # | Bore MM / Inch | Over Sizes | Stroke | Rod Lgth. | Comp Ht. | Head cc's | Dome Dish | Gasket Thkness | Deck Clearance | Block Ht. | Comp. Ratio | Pin Dia. | Ring # | Gram | Foot Notes |
| K585M825 | 82.50 / 3.248 | .020 | 3.681 | 5.753 | 1.220 | 46-49 | -11.5 | .028 | 8.7-9.0 | .787 | 8250xx | 1 | |||
| K585M83 | 83.00 / 3.268 | .040 | 93.5 | 146.1 | 31 | 46-49 | -11.5 | 0.71 | 20mm | 8300xx | 1 | ||||
1. Most Wiseco pistons have offset pins. Pins must be offset same as o.e. for quitest operation - pin offset will be opposite of direction of engine rotation.
2. This piston is a flat top w/out valve pockets, to be used if verifying piston to valve and piston to head clearance.
5. There are different versions of this engine for Audi - do visual inspection of dish/valvepocket area to verify compatibility.
- Some pistons are listed with a range of compression ratio's. The low number is determined with an un-cut deck and the higher number is determined with .030 piston to cylinder head clearance.
- Always check piston to valve clearance - If using VTEC or like mechanisms-check with longer duration higher lift lobe.
- Always run at least .030 piston to head clearance including gasket thickness.
- If piston appears to be different than expected, please do not hesitate to call Wiseco at 800-321-1364 to verify compatibility
Cart
1.866.381.4618